A Beginner's Guide to the Steel Construction Manual, 13th ed. (old)

Chapter 3 - Tension Members

© 2006, 2007, 2008 T. Bartlett Quimby

Overview

Slenderness

Tensile Yielding

Tensile Rupture

Failure Path Tutorial

Tensile Yielding & Tensile Rupture of Connecting Elements

Bolt Bearing on Holes

Block Shear

Selecting Sections

Tension Limit State Summary

Example Problems

Homework Problems

References


Report Errors or Make Suggestions

Purchase Hard Copy

Make Donation

 

Section 3.10

Example Problems

Last Revised: 06/16/2011

The example problems presented in this section have a spreadsheet solution.  You will need this file to follow along with the presented solutions.  You can click on the following link to get the file:

Chapter 3:  Excel Spreadsheet Solutions

Example Problem 3.1:  Determine the tensile capacity of a flat bar.

  • This first problem introduces limit state analysis in detail.

Example Problem 3.2:  Determine the tensile capacity of splice plates.

Example Problem 3.3:  Determine the tensile capacity of a WT section.

<<< Previous Section <<<        >>> Next Section >>>